To configure microwave compression on an MW link SAP on a VLL L2 access interface
Note: You can configure microwave compression only on an MW link SAP associated with a 7705 SAR-8 or 7705 SAR-18.
Microwave compression cannot be configured on an MW link SAP when the Outer Encapsulation Value parameter of the port in Step 6 of To create a VLL L2 access interface on a terminating site is set to 0 or 1.
See To configure a 7705 SAR MW link and To configure a 7705 SAR MW link member for more information about configuring a 7705 SAR MW link and MW link member.
Steps
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens. |
2 |
Choose a VLL and click Properties. The VLL_type Service (Edit) form opens. |
3 |
On the navigation tree, expand Site→L2 Access Interfaces, right-click on the L2 access interface and choose Properties. The VLL L2 Access Interface (Edit) form opens. |
4 |
Click on the Microwave tab. |
5 |
Enable the Compression parameter. |
6 |
Configure the required parameters. |
7 |
Save the changes and close the forms. End of steps |