| |
|
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.
|
2 |
Choose a VPLS and click Properties. The VPLS Service (Edit) form opens.
|
3 |
On the service tree, expand the site on which you want to configure MVR and click Properties. The VPLS Site (Edit) form opens.
|
4 |
Click on the Multicast tab, then on the MVR tab.
|
5 |
Configure the required parameters.
The Administrative State parameter specifies whether a site is an MVR VPLS site.
After the multicast package policy is applied to the MVPLS, the policy is distributed as the routing policy to all MVR-capable MVPLS sites. If you apply another package policy to the site, the new policy is distributed to the site. The previously distributed policy remains on the site.
|
6 |
If you deselect the Use Component Package Policy parameter, you must specify a multicast package policy to associate with the MVR VPLS site. Perform one of the following.
-
Select a multicast package policy.
-
Manually enter a multicast package policy name as the Routing Policy Name parameter value.
|
7 |
View the VPLS SAPs that use the MVR VPLS site.
-
Click on the User MVR SAPs tab.
-
Click Search to list the VPLS SAPs.
|
8 |
Save the changes and close the forms.
End of steps |