To configure L2 management interfaces on a VPLS site
Steps
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens. |
2 |
Configure the filter criteria and click Search. A list of services appears. |
3 |
Choose a VPLS and click Properties. The VPLS Service (Edit) form opens. |
4 |
On the service tree, expand the site on which you want to configure L2 management interfaces and click Properties. The VPLS Site (Edit) form opens. |
5 |
Click on the L2 Management Interfaces tab. |
6 |
Click Create. The VPLS L2 Management Interface, Service - Subscriber (Create) form opens. |
7 |
Configure the required parameters. Note: The NFM-P does not support the configuration of static ARP on a VPLS (MVPLS) L2 management interface. If required, this configuration must be done using CLI. Static ARP configuration must be removed from the interface using CLI before this interface can be removed using the NFM-P. |
8 |
Click on the Addresses tab and click Create. The IP Address, Service - Subscriber (Create) Form opens. |
9 |
Configure the required parameters. |
10 |
Save the changes and close the forms. End of steps |