| |
|
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.
|
2 |
Choose a VPLS and click Properties. The VPLS Service (Edit) form opens.
|
3 |
On the service tree, expand Sites→site→L2 Access Interfaces.
|
4 |
Right-click the L2 access interface and choose Properties. The VPLS L2 Access Interface (Edit) form opens.
|
5 |
Click on the Anti-Spoofing tab.
|
6 |
Configure the required parameters.
The ARP Reply Agent parameter is configurable only when an IP address is specified for the static hosts on the SAP.
|
7 |
Click on the Static Hosts tab to configure a static subscriber host entry for each subscriber host that is not managed by DHCP.
|
8 |
Click Create. The Access Interface Anti-Spoofing Static Host Display (Create) form opens.
|
9 |
Configure the required parameters.
Note: You must specify at least one IP address or MAC address for each static host. The values that are specified for the Anti-Spoofing and ARP Reply Agent parameters determine the type of address entry that is required for the static host. For example, if you set the Anti-Spoofing parameter to Source Ip Addr, you must specify at least the IP address for the static host.
|
10 |
To configure residential subscriber management for the static host:
-
Select a subscriber profile for the static host in the Subscriber Profile panel.
-
Select a subscriber profile for the static host in the Subscriber Profile panel.
-
Select an SLA profile for the static host in the SLA Profile panel.
-
Select an application profile for the static host in the Application Profile panel.
|
11 |
Save the changes and close the forms.
End of steps |