To specify a source subscriber as a mirror source

Steps
 
1 

Choose Manage→Service→Mirror Services from the NFM-P main menu. The Manage Mirror Services form opens.

2 

Select a mirror service and click Properties. The Mirror Service (Edit) form opens.

3 

In the service navigation tree, expand Source Sites→source_sites, right-click on Source Subscribers and choose Create Source Subscriber. The Source Subscriber (Create) form opens.

4 

Configure the required parameters.

5 

You can further restrict the mirrored subscriber host traffic associated with the subscriber identification string by specifying SAP or SLA-profile criteria. To specify an SLA profile as a match criterion, go to Step 7 .

Note: You can configure parameters in the SAP/Subscriber Host Match Criteria panel or the SLA Profile Match Criteria panel, but you cannot configure parameters in both panels.

6 

Specify a SAP on which to mirror subscriber host traffic.

Note: The form lists only dot1q- or QinQ-encapsulated SAPs that have subscriber management enabled.

Perform the following

  1. Select a SAP in the SAP/Subscriber Host Match Criteria panel.

  2. Configure the parameters in the SAP/Subscriber Host Match Criteria panel to specify the subscriber host match criteria for the SAP.

    Note:

    The NFM-P does not accept the parameter values unless a SAP is specified.

7 

To specify an SLA profile as a match criterion, select an SLA profile in the SLA Profile Match Criteria panel.

8 

Save the changes and close the forms.

End of steps