To run one or more OAM diagnostic tests from the STM and view the test results

Purpose

You can run a single OAM diagnostic test from the properties form associated with the test, or from the Service Test Manager (STM) form. To run multiple tests simultaneously, or to add them to an STM test suite, you must use the Service Test Manager (STM) form.

You can view the test results immediately after the test is complete, as outlined in this procedure, or you can view and compare the results of multiple tests, as outlined in To view and compare OAM diagnostic test results on the STM.

Steps
 
1 

Choose Tools→Service Test Manager (STM) from the NFM-P main menu. The Service Test Manager (STM) form opens.

2 

Click on the object drop-down and expand the Test (Assurance) menu item until the required test type appears.

3 

Choose the test type from the menu and click Search. A list of pre-configured tests is displayed.

4 

Run the tests. Choose one or more tests in the list and click Execute.

Note: You can select and execute multiple tests from the test list, except for CCM Tests. If multiple tests including CCM tests are selected, the Execute button is not available.

5 

View the test results.

  1. Select a test in the list and click Properties. The Test (Edit) form opens.

  2. Click on the Results tab. A list of test results is displayed.

6 

Archive the results, if required. Select one or more of the test results and click Archive.

Archived test results are stored indefinitely. They can only be removed by manually selecting and deleting them.

7 

Close the forms.

End of steps