Choose Manage→Service→Composite Services from the NFM-P main menu. The Manage Composite Services form opens.

Select a composite service and click Properties. The Composite Service (Edit) form opens.

In the service navigation tree, right-click on the Connectors icon and choose Create ScpConnector. The SpokeConnector (Create) form opens.

Note: The service endpoints of a spoke connector must be on different NEs.

Configure the required general parameters.

Select an SC to associate with the connector in the Service A panel.

Select an SC to associate with the connector in the Service B panel.

Select a site from service A to associate with the connector in the Site A panel.

Select a site from service B to associate with the connector in the Site B panel.

Click on the Transport tab.

Configure the parameters.

The Transport Type parameter is configurable when the Auto Select Tunnels parameter is enabled.

Select a service tunnel to associate with the connector in the Tunnel A panel

Select a service tunnel to associate with the connector in the Tunnel B panel

If one of the SCs in the composite service is an IES, the First L3 Access Interface and Second L3 Access Interface panels are present. Select an access interface to associate with the spoke connector in the First L3 Access Interface and Second L3 Access Interface panels. Otherwise, go to Step 4 .

Save the changes and close the forms.

End of steps