| |
|
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.
|
2 |
Choose an IES and click Properties. The IES (Edit) form opens.
|
3 |
On the service tree, expand Sites→routing_instance→Subscriber Interfaces→subscriber_interface.
|
4 |
Right-click on a group interface. The IES Group Interface (Edit) form opens.
|
5 |
Click on the PIM Interfaces tab.
|
6 |
Click on the Add button. The PIM Interface (Create) form opens.
|
7 |
Configure the required parameters.
|
8 |
Click on the Behavior tab.
-
Configure the required parameters.
-
To change the IPv4 or IPv6 administrative state for the PIM interface, click on the IPv4 and IPv6 tabs and configure the Administrative State parameter, as required.
|
9 |
Click on the Multicast CAC tab to configure multicast CAC on the PIM interface.
-
Select a multicast CAC policy.
-
Configure the Unconstrained Bandwidth and Mandatory Bandwidth parameters.
-
Click on the Levels tab.
-
Click Create. The PIM Interface Multicast CAC level form opens.
-
Configure the Level ID and Bandwidth parameters.
-
Save your changes and close the form.
-
Click on the LAG Port Down tab.
-
Click Create. The PIM Interface Multicast CAC LAG Port Down form opens.
-
Configure the Number of Ports Down and Level parameters.
|
10 |
Save your changes and close the forms.
End of steps |