To add an IGMP interface to an IES

Note: IGMP must be enabled on the NE routing instance before you can create an IGMP interface.

Steps
 
1 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

2 

Choose an IES and click Properties. The IES Service (Edit) form opens.

3 

On the service tree, expand the Sites icon and click on a site. The IES Site (Edit) form opens.

4 

Click on the Multicast tab, then the Interfaces tab.

5 

Click Add. The Create Interface form opens.

6 

Set the What type of interface would you like to create? parameter to IGMP.

7 

Click OK. The IGMP Interface (Create) form opens.

8 

Select an interface and configure the parameters.

9 

Click on the Behavior tab and configure the parameters.

10 

To add a multicast CAC policy:

  1. Click on the Multicast CAC tab.

  2. Select a multicast CAC policy in the Multicast CAC Policy panel.

  3. Configure the required parameters.

  4. Click on the Levels tab and click Create. The Multicast CAC Level, IGMP Interface (Create) form opens.

  5. Configure the parameters and close the form.

  6. Click on the LAG Port Down tab and click Create. The LAG Port Down, IGMP Interface (Create) form opens.

  7. Configure the parameters and close the form.

11 

To configure SSM translation:

  1. Click on the SSM Translation tab and click Create. The SSM Translation, IGMP Interface (Create) form opens.

  2. Configure the required parameters and close the form.

12 

To add a static multicast group or source:

  1. Click on the Static Group/Source tab and click Create. The StaticGrpSrc, Interface ID - 6, Routing Instance (Create) form opens.

  2. Configure the required parameters, save the changes and close the form.

13 

Save the changes and close the form.

14 

On the multicast tab, click on the IGMP Group Interfaces tab to identify an IGMP group interface for the IES service.

  1. Click Create. The IGMP Group Interface - Routing Instance (Create) form opens.

  2. Configure the required parameters.

  3. Select an IGMP group interface in the IGMP Group Interface panel and configure the parameters.

  4. Click on the Behavior tab. select an import policy and configure the required parameters.

  5. Click on the Multicast CAC tab to add a multicast CAC policy.

  6. Select a multicast CAC policy in the Multicast CAC Policy panel and configure the required parameters.

  7. Close the form.

15 

Close the forms.

End of steps