To create an L2 SDP spoke termination on an IES service

Purpose

Ensure that a service and site are created in the IES. To terminate an L2 service on an IES SDP spoke, you must identify the VC and an interface that belong to the VC. The interface must not have an associated port.

Steps
 
1 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

2 

Choose an IES and click Properties. The IES Service (Edit) form opens.

3 

On the service tree, expand Sites→site, right-click on Spoke Sdp Bindings and choose Create Spoke SDP Binding. The Spoke SDP Binding (Create) form opens.

4 

Select a source interface for the spoke SDP binding in the Source Interface panel.

5 

Specify a destination NE for the spoke SDP binding:

  1. If the destination NE is a managed NE, select an NE in the Tunnel Termination Site panel.

  2. If the destination NE is an unmanaged NE, specify the system ID for the Tunnel Termination Site parameter.

6 

Configure the required general parameters.

These parameters appear only when a source interface is assigned to the spoke SDP binding.

The range of the Ingress Label parameter depends on the parameter value set for the Static Label Range on the MPLS instance. See To configure an MPLS instance .

7 

Configure the parameters in the Hash Label panel.

The Enable Hash Label and Enable Signal Capability parameters can only be configured for spoke-SDP bindings that are access interface terminated.

8 

Perform one of the following to specify a transport tunnel for the spoke SDP binding.

  1. Let the NFM-P configure the transport tunnel automatically by enabling the Auto-Select Transport Tunnel parameter and configuring the Tunnel Auto-Selection Transport Preference parameter.

  2. Configure the transport tunnel manually by selecting a tunnel in the Tunnel panel.

  3. Configure an MPLS-TP transport tunnel manually by selecting a tunnel in the tunnel panel. See To create an IP/MPLS service tunnel for more information about how to create an MPLS-TP service tunnel.

9 

To specify an application profile for the spoke SDP binding, by selecting an application profile string.

Note: The Application Profile String: - Spoke SDP Binding - IES service form displays only local profiles on the NE.

10 

Choose one of the following AA transit policy types, if required.

Note: You can only associate one AA transit policy type with a service object.

To bind a transit policy to an L3 access interface, a port must already exist on the interface.

You can bind a transit policy to only one L3 access interface or spoke SDP binding per NE.

The transit policy and the application profile must belong to the same application assurance group or partition.

  1. Associate an AA transit IP policy with the service object by selecting a transit IP policy in the Transit IP Policy panel.

  2. Associate an AA transit prefix policy with the service object by selecting a transit prefix policy in the Transit Prefix Policy panel.

11 

To associate an AA redundant protocol with the service object, select an AA redundant protocol in the AA Redundant Protocol panel.

12 

Configure the AARP Service Reference Type parameter.

13 

To configure custom object attributes for AA reporting:

  1. Click on the NSP Analytics Parameters tab, then the Reporting tab.

  2. Click Create. The AA Reporting (Create) form opens.

  3. Configure the required parameters.

  4. Save the changes and close the form.

  5. Click on the General tab.

14 

To configure QoS:

  1. Click on the QoS tab.

  2. Select a network policy and an ingress queue group template policy in the Forwarding Plane Redirect panel.

  3. Configure the Instance ID parameter in the Forwarding Plane Redirect panel.

  4. Select a network policy and egress queue group template policy to assign to the Spoke SDP Binding in the Port Redirect panel.

  5. Configure the Instance ID parameter in the Port Redirect panel.

15 

Click on the States tab and configure the Administrative State parameter.

16 

To assign ingress and egress ACL filters to the spoke SDP binding:

  1. Click on the ACL tab.

  2. Select an ingress ACL filter in the Ingress Filter panel.

  3. Select an egress ACL filter in the Egress Filter panel.

17 

To assign an accounting policy to the spoke SDP binding:

  1. Click on the Accounting tab.

  2. Configure the Collect Accounting Statistics parameter.

  3. Select an accounting policy.

18 

Note: A default DoS protection policy is automatically assigned to the SAP.

To assign a DoS protection policy or DDoS protection policy to the SAP:

  1. Click on the Security tab.

  2. Select a DoS protection policy in the NE DoS Protection panel.

  3. Select an NE DDoS protection policy.

  4. Configure the required parameters.

19 

To associate a MEP with an SDP binding:

  1. Click on the OAM tab, then the ETH-CFM tab.

  2. Click Create in the MEPs panel. The MEP (Create) form opens.

  3. Select a maintenance entity group.

  4. Configure the required parameters.

    The CCM Padding Packet Size (Bytes) parameter cannot be configured when the CCM interval parameter is set to 10 ms or 100 ms.

  5. If the MD for the MEP has a Name Type of none and the associated MEG has a Name Format of icc-based, the Y.1731 Tests and AIS tabs are configurable. Click on the Y.1731 Tests tab. Otherwise, go to Step 20 .

  6. Configure the required parameters.

    The Eth Test Pattern parameter is configurable when the Eth Test Enabled parameter is enabled.

  7. Click on the AIS tab and configure the required parameters.

20 

Save the changes and close the forms.

End of steps