To configure DHCPv6 on an IES L3 access interface
Steps
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens. |
2 |
Choose an IES service and click Properties. The IES Service (Edit) form opens. |
3 |
Expand the Site icon in the service navigation tree on which you need to configure the L3 access interface, right-click on the L3 Access Interface icon and choose Properties. The IES L3 Access Interface (Edit) form opens. |
4 |
Ensure that the IPv6 Allowed parameter is enabled. |
5 |
Click on the DHCPv6 tab and configure the required parameters on the DHCPv6 Relay — General tab. |
6 |
Select a python policy, if required. |
7 |
Select a local user database, if required. |
8 |
Click on the Server tab. |
9 |
Configure the Server 1 through Server 8 parameters. |
10 |
Configure the interface name for each DHCPv6 server that you configured in Step 9 by selecting the an interface in the Zone Index panel. |
11 |
Click on the DHCPv6-Prefix tab. |
12 |
Click Create. The DhcpRelayV6PrefixDelegation (Create) form opens. |
13 |
Configure the required parameters. |
14 |
Save the changes and close the forms. End of steps |