| |
|
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.
|
2 |
Choose the required VPLS and click Properties. The VPLS Service (Edit) form opens.
|
3 |
On the service tree, expand Sites, click on the B-VPLS site on which you want to configure PBB-EVPN, and click Properties.
|
4 |
Click on the Backbone tab. Configure a source MAC address and enable the Use Ethernet Segment Backbone MAC parameter.
|
5 |
Click on the BGP tab, and then on the EVPN sub-tab.
|
6 |
Click the Create button in the BGP EVPN panel and configure the parameters on the form that appears.
|
7 |
Add one or more ISID route targets for the PBB-EVPN by performing the following.
-
Click on the ISIS Route Target sub-tab and click Create. The ISIS Route Target (Create) form opens.
-
Configure the required parameters.
-
Click OK to close the form.
|
8 |
Configure static MACs for the PBB-EVPN by performing the following.
-
Click on the Static MACs tab and click Create. The Conditional Static Mac form opens.
-
Configure the required parameters.
-
Save your changes and close the form.
|
9 |
Configure ISID policies for the PBB-EVPN by performing the following.
-
Click on the ISID Policy tab and click Create. The ISID Policy Range Entry form opens.
-
Configure the required parameters.
-
Save your changes and close the form.
|
10 |
Save your changes and close the forms.
End of steps |