To configure PTP on a VPRN site

Note: PTP must be enabled on the base router before it can be configured on a VPRN site. See To configure the IEEE 1588 PTP clock on a 7210 SAS, 7250 IXR, 7450 ESS, or 7750 SR for information about configuring PTP on the 7705 SAR and 7750 SR.

Steps
 
1 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

2 

Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens.

3 

On the service navigation tree, expand Sites, right-click on a routing instance and choose Properties. The VPRN Site (Edit) form opens.

4 

Set the PTP State parameter to Enabled.

5 

Click on the PTP tab and configure the required general parameters.

6 

To create PTP peers:

  1. Click on the Peers tab.

  2. Click Create. The IEEE 1588 PTP Peer (Create) form opens.

  3. Configure the required parameters.

  4. Save the changes and close the form.

7 

Save the changes and close the forms.

End of steps