To configure IGMP on a VPRN routing instance

Note: PIM-SSM for IPv6 is not supported in VPRN services.

Steps
 
1 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

2 

Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens.

3 

On the service navigation tree, expand Sites→Routing Instance→Routing Instance→Routing Instance→Protocols, right-click on Protocols and choose Create IGMP Site. The IGMP Site (Edit) form opens.

4 

Configure the required general parameters.

5 

To configure SSM:

  1. Click on the SSM Translation tab.

  2. Click Create to create a new entry. The SSM Translation (Create) form opens.

  3. Configure the required parameters.

  4. Save the changes and close the form.

6 

To add an interface:

  1. Click on the Interfaces tab.

  2. Click Create. The IGMP Interface (Create) form open.

  3. Select an interface and configure the required parameters.

  4. Save the changes and close the form.

7 

To identify an IGMP group interface for a VPRN service:

  1. Click on the Group Interfaces tab

  2. Click Create. The IGMP Group Interface (Create) form opens.

  3. Configure the required parameters.

  4. Select an IGMP group interface in the IGMP Group Interface panel and configure the required parameters.

  5. To configure behavior, click on the Behavior tab, select an import policy and configure the required parameters.

  6. To configure multicast CAC, click on the Multicast CAC tab, select a multicast CAC policy and configure the required parameters.

  7. Save the changes and close the form.

8 

Save the changes and close the forms.

End of steps