To configure bi-directional protection switching on an 1830 VWM OPS shelf

Steps
 
1 

Configure an OPS OSM-DSV card on an 1830 VWM OPS shelf:

  1. On the equipment tree, expand Network→NE→Shelf→Card Slot n.

  2. Assign the OPS OSM-DSV card, see To assign a card type.

  3. On the Card Slot (Edit) form, click on the Card Specifics tab and configure the Assigned Status parameter as Assigned.

  4. Click Apply and confirm your actions.

  5. Configure the required parameters in the OPS OSM-DSV Specifics panel.

  6. Save your changes and close the form.

2 

Configure bi-directional protection switching for the PSE-R:

  1. On the equipment tree, right-click on the 1830 VWM-OSU NE and choose Properties. The NE (Edit) form opens.

  2. Click on the PSE-R PMU-D group tab and click Create. The PSE-R PMU-D group (Create) form opens.

  3. Configure the PMUD Group parameter.

  4. Select one to four PMUD in the PMUD panels.

  5. Click on the OPS PSE-R tab and click Create. The OPS PSE-R (Create) form opens.

  6. Configure the required parameters.

    Note: You must select a PMUD Group.

  7. Click Apply. The OPS OSM PSE-R (Edit) form appears with the OPS OSM PSE-R protection switch management tab.

  8. Configure the Activate parameter as True and configure the required parameters, if applicable.

  9. Click Apply and confirm you actions.

3 

Configure bi-directional protection switching for the PSE-L:

  1. Click on the OPS PSE-L tab and click Create. The OPS PSE-L (Create) form opens.

  2. Configure the Description parameter.

  3. Select an OPS OSM-DSV card for the Slot parameter.

  4. In the Worker Loop Monitor Interface panel, configure the port as OSC1.

  5. In the Protection Loop Monitor Interface, configure the port as OSC2.

  6. Click Apply. The OPS OSM PSE-L (Edit) form appears with the OPS OSM PSE-L protection switch management tab.

  7. Configure the Activate parameter as True and configure the required parameters, if applicable.

  8. Click Apply and confirm your actions.

4 

Save your changes and close the forms.

End of steps