| |
|
1 |
In the navigation tree routing view, expand Network→1830 TPS→Routing Instance.
|
2 |
Right-click on the routing instance icon and choose Properties. The Routing Instance (Edit) form opens.
|
3 |
Click on the TPS Routing Instance tab, and the Ethernet Interfaces sub-tab.
|
4 |
Create a new Ethernet interface, or choose an Ethernet interface to configure.
-
Create a new Ethernet interface by performing the following:
-
Click on the Create button. The Ethernet Interface (New Instance) form opens.
-
Click Select and choose a card slot for the Ethernet interface.
-
Configure the parameters as required, and click Apply.
-
Select an Ethernet interface and click on Properties. The Ethernet Interface form opens.
|
5 |
Configure the parameters in the Control Network and OSPF panels, as required.
|
6 |
Click OK to save your changes and close the Ethernet Instance form.
|
7 |
Click on the DHCP Server tab. Click Create to create a new DHCP Server, or select an existing server and click Properties. The DHCP Server form appears.
|
8 |
Configure the parameters as required, then click OK to save and close the form.
|
9 |
Click on the DHCP Relay tab. Click Create to create a new DHCP Relay entry, or select an existing entry and click Properties. The DHCP Relay form opens.
|
10 |
Configure the port types, and select the ports to be used by the relay.
|
11 |
Configure the DHCP Server IP parameter, then click OK to save and close the form.
|
12 |
Click OK on the Routing Instance form to save your changes and close the form.
End of steps |