To enable BMP

Steps
 
1 

Perform one of the following:

  1. Navigate to a BGP site, peer group, or peer on an NE.

    In the navigation tree Routing view, expand to one of the following:

    • Network→NE→Routing Instance→BGP

    • Network→NE→Routing Instance→BGP→Peer Group.

    • Network→NE→Routing Instance→BGP→Peer Group→Peer.

  2. Navigate to a BGP site, peer group, or peer on a VPRN routing instance.

    1. Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

    2. Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens.

    3. On the service navigation tree, expand to one of the following:

      • Sites→Routing Instance→Protocols→BGP

      • Sites→Routing Instance→Protocols→BGP→Peer Group.

      • Sites→Routing Instance→Protocols→BGP→Peer Group→Peer.

Right-click on the BGP entity and choose Properties. The BGP entity (Edit) form opens.

2 

Click on the BMP tab.

3 

Configure the Enable Monitoring parameter and click Apply. The Monitor and Stations panels appear.

4 

Configure the All Stations parameter to enable all stations to monitor BGP, or select individual stations in the Stations panel.

5 

Configure the parameters.

6 

Save your changes and close the forms.

End of steps