To modify MAC address range entries in an OmniSwitch LPS port

Steps
 
1 

In the navigation tree Routing view, expand Network→OmniSwitch NE→Bridge Instance.

2 

Right-click on the Bridge Instance Object icon and choose Properties. The Bridge Instance (Edit) form opens.

3 

Choose a port and click Properties. The Learned Port Security (Edit) form opens.

4 

Click on the LPS Learned MAC Ranges tab. A list of Low and High MAC address ranges added on the LPS port is displayed.

5 

Select the MAC address range entry to modify. You may either click Properties button or double-click the MAC range entry.

6 

You can edit the MAC address range entries to meet the following conditions:

  • Overlapping Low or High MAC Ranges are not allowed.

  • When the MAC address range entry must contain the Low MAC Range starting from 00-00-00-00-00-00, click on the default entry 00-00-00-00-00-00 to FF-FF-FF-FF-FF-FF to modify the High MAC Range

  • To expand the LPS MAC range, keep the Low MAC Range the same and modify the High MAC Range to a higher value than the current High MAC Range value

  • To shrink the LPS MAC range, keep the Low MAC Range the same and modify the High MAC Range to a lower value than the current High MAC Range value

  • Overlapping low or high MAC range is not allowed.

7 

Click OK to save your changes.

8 

If required, repeat steps Step 5 to Step 7 to modify the MAC range entries.

9 

If required, repeat steps Step 3 to Step 7 to modify the MAC range entries for other LPS ports.

10 

Click Apply to save the changes and close the form.

End of steps