Card Inventory (NSP) report

Card Inventory (NSP) report overview

The Card Inventory (NSP) report differs from the Card Inventory report by additionally including inventory data for NEs managed using model-driven mediation.

For MDM-mediated NEs, cards are mapped as IOM cards.

The Card Inventory (NSP) report shows the NEs and sites selected and proportion of empty and populated IOM, IMM, MDA, and Wavence slots. The default display is a pie chart and a set of tables displaying details.

Limitations

When the report is exported to the RTF file type, report data does not display.

Prerequisites

An MDM adapter is required for MDM-mediated NEs. Contact your technical support representative for more information. You must also enable statistics; see the Data Collection and Analysis Guide.

Report characteristics

The following table lists the principal report characteristics.

Table 17-1: Card Inventory (NSP) report characteristics

Characteristic   

Value

Data type

NE configuration information

Source database

NSP main database

NE types supported

all 7705 SAR variants

all 7750 SR and VSR variants

all 7450 ESS variants

all 7950 XRS variants

all 7250 IXR variants

all 7210 SAS variants

OS 6860, OS 6450, OS 6900

Wavence MSS-1, Wavence MSS-4, Wavence MSS-8, Wavence MSS-O, Wavence MSS-1c, Wavence SA, 9500 MPR-A Chassis 1, 9500 MPR-A Chassis 4, 9500 MPR-A Chassis 8, 9500 MPR-E Chassis 1, 9500 MPR-E Chassis 4, 9500 MPR-E Chassis 8, 9500 MSS-1c, 9500 MSS-O ANSI, 9500 MSS-O ETSI, 9500 SA

MDM-mediated NEs. The support for MDM-mediated NEs depends on the availability of the MDM adapters for the particular NE version and variants installed in the network.

Support is limited to NEs found in the network.

Report inputs

Prompt

Notes

NE types

Search using partial names or wildcard (%).

At least one NE ID or NE name must be entered.

Name or name pattern for NEs

NEs

Warning Threshold %

Ranges from 0 to 100

Critical Threshold %

Ranges from 0 to 100

Logo Resource ID

The logo to add to the report. Enter the Resource ID of the logo image in the Images folder.

The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.

Logo Position

Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.

Show report output on one page

Select the check box to enable pagination.

Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports.

Drill-down support

No

Example

The following figures show a Card Inventory (NSP) report example.

Figure 17-1: Card Inventory (NSP) report
Card Inventory (NSP) report
Card Inventory (NSP) report
Card Inventory (NSP) report
Card Inventory (NSP) report