Link Unavailability Summary report

Link Unavailability Summary report overview

The Link Unavailability Summary report shows high-level information about the unavailable seconds of the associated port or LAG on a radio and MWA link. The operator can select multiple radio links and MWA links for the selected interval. The Link Unavailability Summary report can be generated based on radio and MWA links between the NEs of the respective ports or LAGs.

Use cases

Capacity planning—Use the report to examine the unavailable seconds based on the radio link between the NEs of the respective ports or LAGs.

Prerequisites

To create the Link Unavailability Summary report, enable the Hop History Data Statistics by selecting the Product Name as ‘Wavence SM’ using NSP Classic management.

The following table lists the statistics that must be collected on each NE; see the NSP NFM-P Statistics Management Guide for information about configuring statistics collection.

Table 15-17: Link Unavailability Summary report prerequisites

Aggregator name

Monitored object class

Statistics class

Statistics collection

MIB

NE types

Not applicable

Port

LAG

UBT

G.826

Hop History Data stats (15Min)

opticsIMPdhFrameHopHistoryDataEntry

Wavence MSS-1, Wavence MSS-4, Wavence MSS-8, Wavence MSS-O, Wavence MSS-E, Wavence MSS-HE, Wavence MSS-XE, Wavence MSS-1c, Wavence SA, Wavence UBT-SA, Wavence UBT-I, Wavence UBT-T XP, 9500 MPR-A Chassis 4, 9500 MPR-A Chassis 8, 9500 MPR-E Chassis 1, 9500 MPR-E Chassis 4, 9500 MPR-E Chassis 8, 9500 MSS-1c, 9500 MSS-O ANSI, 9500 MSS-O ETSI, 9500 SA, 7705 SAR with PMC

Report characteristics

The following table lists the principal report characteristics.

Table 15-18: Link Unavailability Summary report characteristics

Characteristic

Value

Statistics type

Performance statistics

NSP flow collector required

No

NE types supported

Wavence MSS-1, Wavence MSS-4, Wavence MSS-8, Wavence MSS-E, Wavence MSS-HE, Wavence MSS-XE, Wavence MSS-O, Wavence MSS-1c, Wavence SA, Wavence UBT-SA, Wavence UBT-I, Wavence UBT-T XP, 9500 MPR-A Chassis 1, 9500 MPR-A Chassis 4, 9500 MPR-A Chassis 8, 9500 MPR-E Chassis 1, 9500 MPR-E Chassis 4, 9500 MPR-E Chassis 8, 9500 MSS-1c, 9500 MSS-O ANSI, 9500 MSS-O ETSI, 9500 SA, 7705 SAR with PMC

Report inputs

Prompt

Notes

Start date

End date

Calendar date or relative date (for example, two days ago) and time

Links

Select individual links or click Select All.

Unavailability Seconds Threshold

Specify the value in seconds

Show threshold violations only

Select to see threshold violations only.

Logo Resource ID

The logo to add to the report. Enter the Resource ID of the logo image in the Images folder. The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.

Logo Position

Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.

Show report output on one page

Select the check box to enable pagination.

Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports.

Apply

Applies all the parameters and prepares the report based on the parameters entered.

Reset

Resets all the parameters to default value.

Drill-down support

Yes—Open the Link Unavailability Details for the selected NE.

Example

The following figures show a report example.

Figure 15-23: Link Unavailability Summary report
Link Unavailability Summary report
Figure 15-24: Link Unavailability Summary Report, continued
Link Unavailability Summary Report, continued