Ports and Interfaces Forwards and Discards per Queue Summary report

Ports and Interfaces Forwards and Discards per Queue Summary report overview

The Ports and Interfaces Forwards and Discards per Queue Summary report contains a summary of information about throughput and utilization information for each forwarding class of a port, LAG, bundle and associated network and access interfaces for all possible modes, including network, access, or hybrid.

The network interface scenario is not supported.

Note: Either generate or schedule the reports for each region or subregion individually. These reports are for all ports, LAGs, bundles, Scada, channels, interface and SAPs in the network, resulting in a summary of millions of rows over thousands of pages.

Use cases

SLA monitoring—Use the report to examine traffic drop patterns to ensure that service-level agreements are met.

Limitations

Report limitations include:

When the report is exported to the DOCX file type, an empty space displays.
When the report is exported to the RTF file type, half of the page displays.
When the report is exported to the ODT file type, the table does not display properly.

Prerequisites

The following table describes the file and accounting policies that must be configured for the NEs on which statistics are to be collected; see the NSP NFM-P Statistics Management Guide for information about configuring file and accounting policies.

Table 11-22: Ports and Interfaces Forwards and Discards per Queue Summary report prerequisites

Monitored object class	Statistics class	Statistics collection	MIB name	NE types
equipment.PhysicalPort	service.CombinedNetworkEgressOctets	Accounting, file, and log policies	combinedNetIngrEgr Policy	7705 SAR 7705 SAR-H 7750 SR
equipment.PhysicalPort	service.CombinedNetworkIngressOctets	Accounting, file, and log policies	combinedNetIngrEgr Policy	7210 SAS-D 7210 SAS-MXP 7210 SAS R 7705 SAR 7705 SAR-H 7750 SR
lag.Interface	service.CombinedNetworkEgressOctets	Accounting, file, and log policies	combinedNetIngrEgr Policy	7705 SAR 7705 SAR-H 7750 SR
lag.Interface	service.CombinedNetworkIngressOctets	Accounting, file, and log policies	combinedNetIngrEgr Policy	7210 SAS-D 7210 SAS-MXP 7210 SAS R 7705 SAR 7750 SR 7705 SAR-H
bundle.Interface	service.CombinedNetworkEgressOctets	Accounting, file, and log policies	combinedNetIngrEgr Policy	7705 SAR 7705 SAR-H 7750 SR
bundle.Interface	service.CombinedNetworkIngressOctets	Accounting, file, and log policies	combinedNetIngrEgr Policy	7705 SAR 7705 SAR-H 7750 SR
service.L3AccessInterface	service.CompleteServiceEgressPacketOctets service.CompleteServiceIngressPacketOctetsA	Accounting, file, and log policies	completeSvcInEg policy,svcEgressOctet policy	7250 IXR-R6 7705 SAR 7705 SAR-H 7750 SR
service.L3AccessInterface	service.ServiceEgressOctets service.ServiceIngressOctets	Accounting, file, and log policies	completeSvcInEg policy svcIngressOctet policy	7210 SAS-D 7210 SAS-MXP 7210 SAS R 7705 SAR-H
service.L2AccessInterface	service.CompleteServiceEgressPacketOctets service.CompleteServiceEgressPacketOctets	Accounting, file, and log policies	completeSvcInEg policy svcEgressOctet policy	7705 SAR 7705 SAR-H 7750 SR
service.L2AccessInterface	service.ServiceEgressOctets service.ServiceEgressOctets	Accounting, file, and log policies	completeSvcInEg policy svcEgressOctet policy	7210 SAS-D 7210 SAS-MXP 7210 SAS-R 7705 SAR-H

Notes:

For equipment.PhysicalPort, lag.Interface, service.L2AccessInterface and service.L3AccessInterface, SAS,equipment does not support per FC counters.
For service.L2AccessInterface and service.L3AccessInterface, IXR equipment do not support egress QoS policy.

Report characteristics

The following table lists the principal report characteristics.

Table 11-23: Ports and Interfaces Forwards and Discards per Queue Summary report characteristics

Characteristic	Value
Data type	Statistics
Source database	Auxiliary database
Report inputs	Prompt	Notes
	End date	Calendar date or relative date (for example, two days ago) and time
	Report range	Length of time to be reported, in minutes (minutes, min), hours (hours, h), days (days, d), weeks (w), or months (months, m)
	Region
	Subregion	Only subregions below the top-level region are displayed in the prompt. Objects in the lower subregions are automatically selected when their subregion is selected.
	Ingress Threshold	Specify in bps/Kbps/Mbps/Gbps
	Egress Threshold	Specify in bps/Kbps/Mbps/Gbps
	Logo Resource ID	The logo to add to the report. Enter the Resource ID of the logo image in the Images folder. The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.
	Logo Position	Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.
	Show threshold violations only	Select to see threshold violations only.
	Show report output on one page	Select the check box to enable pagination. Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports.
Drill-down support	Yes—Click on a KPI in a table cell to launch the Details report

Example

The following figures show a report example. The table below is a single table, but is separated due to its width. Not all figures are from the same report.