Port Details report
Port Details report overview
The Port Details report shows the port usage details for selected NEs and sites. The default display is a table displaying details of the port. If a port is used in a backhaul service or is a member of the lag group, then the corresponding port is marked as used port. Protection ports are not shown as "used ports" in the port details reports.
The port count in a slot is calculated based on grouping the NE Type, NE ID, Port Class, and Port Description. Total port count is calculated based on grouping the NE ID and slot.
Report characteristics
The following table lists the principal report characteristics.
Table 12-3: Port Details report characteristics
Characteristic |
Value | |||||
---|---|---|---|---|---|---|
Data type |
NE configuration information | |||||
Source database |
NSP database | |||||
NE types supported |
all 7705 SAR variants all 7750 SR and VSR variants all 7450 ESS variants all 7950 XRS variants all 7250 IXR variants all 7210 SAS variants OS 6860, OS 6450, OS 6900 Wavence MSS-1, Wavence MSS-4, Wavence MSS-8, Wavence MSS-O, Wavence MSS-1c, Wavence SA, 9500 MPR-A Chassis 1, 9500 MPR-A Chassis 4, 9500 MPR-A Chassis 8, 9500 MPR-E Chassis 1, 9500 MPR-E Chassis 4, 9500 MPR-E Chassis 8, 9500 MSS-1c, 9500 MSS-O ANSI, 9500 MSS-O ETSI, 9500 SA | |||||
Support is limited to NEs found in the network. | ||||||
Report inputs |
Prompt |
Notes | ||||
Node Types |
Search using partial names or wildcard (%). At least one NE or site name must be entered. | |||||
Sites (or Name Pattern) | ||||||
Sites |
Search using the site name. | |||||
Warning Threshold % |
Ranges from 0 to 100 | |||||
Critical Threshold % |
Ranges from 0 to 100 | |||||
Logo Resource ID |
The logo to add to the report. Enter the Resource ID of the logo image in the Images folder. The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank. | |||||
Logo Position |
Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle. | |||||
Show report output on one page |
Select the check box to enable pagination. Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports. Note: When the report output is displayed on multiple pages, the logo displays only on the first page. | |||||
Drill-down support |
No |
Example
The following figure shows a report example.