Radio Link Inventory report
Radio Link Inventory report overview
The Radio Link Inventory report shows the radio links on the selected NEs, along with the frequency, capacity and utilization of radio and MWA links and the frequency and temperature of MWA links. Wavence and SAR nodes must be discovered using NSP Classic management; MWA links are supported on SAR nodes, and radio links on Wavence nodes.
Note: When you enter a search term that returns zero links, you can still load a report for the links in the network
Limitations
When you export the report to any format, elements of the report table may not be aligned correctly.
Report characteristics
The following table lists the principal report characteristics.
Table 15-3: Radio Link Inventory report characteristics
Characteristic |
Value |
Data type |
Radio |
Source database |
NSP database |
NE types supported |
Wavence MSS-1, Wavence MSS-4, Wavence MSS-8, Wavence MSS-O, Wavence MSS-E, Wavence MSS-HE, Wavence MSS-XE, Wavence MSS-1c, Wavence SA, 9500 MPR-A Chassis 1, 9500 MPR-A Chassis 4, 9500 MPR-A Chassis 8, 9500 MPR-E Chassis 1, 9500 MPR-E Chassis 4, 9500 MPR-E Chassis 8, 9500 MSS-1c, 9500 MSS-O ANSI, 9500 MSS-O ETSI, 9500 SA, 7705 SAR with PMC
Note: The 7705 SAR-H is not supported. |
Support is limited to NEs found in the network. |
Report inputs |
Prompt |
Notes |
Node Types |
Search using partial names or wildcard (%). |
Filter |
Displays information about the parameters, which can be filtered based on the following attributes: This includes
-
Tx Frequency (Ghz)
-
Rx Frequency (Ghz)
-
Max Capacity (Mbps)
-
Min Capacity (Mbps)
-
Current Capacity (Mbps)
-
Current Utilization (%)
To generate a Radio link inventory report on a MWA link, Filter and distance unit must be none and value must be empty. |
Value |
Specify the value using required expressions (>100k or <100M) based on the attributes selected in the Filter parameter.
To generate a Radio link inventory report on a MWA link, Filter and distance unit must be none and value must be empty. |
Logo Resource ID |
The logo to add to the report. Enter the Resource ID of the logo image in the Images folder. The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank. |
Logo Position |
Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle. |
Show report output on one page |
Select the check box to enable pagination.
Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports. |
Radio link |
Select up to 1000 radio links to display in the report. If you do not select any links, then the report displays network-wide radio links. |
Distance unit |
Choose whether to display distances in kilometres or miles for Wavence nodes. |
Drill-down support |
No |
Example
The following figure shows a report example.