OAM-PM Bins and Delay (NSP) report

OAM-PM Bins and Delay (NSP) report overview

The OAM-PM Bins and Delay (NSP) report differs from the OAM-PM Bins and Delay report by including OAM data for NEs managed by the NFM-P and MDM (model-driven Nokia NEs). The report shows an OAM-PM session with a bin count bar graph and a delay line overlay.

Use cases

QoS analysis—Identify potential performance or SLA impact for a service

Prerequisites

The following sessions need to be performed in the NSP and NFM-P for the report to be created:

Report inputs

The following table shows the report inputs.

Table 18-5: OAM-PM Bins and Delay (NSP) report inputs

Prompt

Notes

Session Type

ETH-CFM Session, TWAMP-Light Session

End Date

Calendar date or relative date (for example, two days ago) and time

Granularity

Aggregation types:

  • Hourly

  • Daily

  • Monthly

  • None (raw collection interval)

Report range

Length of time to be reported, in minutes (minutes, min), hours (hours, h), days (days, d), or months (months, m)

Session name

Search using partial names, full names, or IP addresses.

Bin Type

Bin types as configured in the NSP and NFM-P

Interval Duration

5 minutes, 15 minutes, 1 hour, or 1 day

Delay Type

Maximum, average, or minimum

Logo resource ID

The logo to add to the report. Enter the Resource ID of the logo image in the Images folder.

The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank.

Logo Position

Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle.

Show Report Output On One Page

Select the check box to enable pagination.

Note: Using the Show report on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report on one page option when creating reports.

Report characteristics

The following table lists the principal report characteristics.

Table 18-6: OAM-PM Bins and Delay (NSP) report characteristics

Characteristic

Value

Data type

OAM PM statistics

Source database

Auxiliary database

NE types supported

7210 SAS-M 24F, 7210 SAS-M 24F 2XFP, 7210 SAS-M 24F 2XFP ETR, 7210 SAS-T 12F 10T 4XFP, 7210 SAS-T 12F 10T 4XFP ETR, 7210 SAS-X 24F 2XFP, 7210 SAS-K, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-S/SX 1/10GE VC

7250 IXR-6, 7250 IXR-R6, 7250 IXR-s, 7250 IXR-10, 7250 IXR-e

all 7450 ESS variants

all 7750 SR variants

all 7950 XRS variants

Drill-down support

No

Examples

The following figures show report examples.

Figure 18-3: OAM-PM Bins and Delay (NSP) report – NFM-P NE TWAMP light session bins and delay
OAM-PM Bins and Delay (NSP) report – NFM-P NE TWAMP light session bins and delay
Figure 18-4: OAM-PM Bins and Delay (NSP) report – NFM-P NE CFM DMM session bins and delay
OAM-PM Bins and Delay (NSP) report – NFM-P NE CFM DMM session bins and delay
Figure 18-5: OAM-PM Bins and Delay (NSP) report – MDM NE TWAMP light session bins and delay
OAM-PM Bins and Delay (NSP) report – MDM NE TWAMP light session bins and delay
Figure 18-6: OAM-PM Bins and Delay (NSP) report – MDM NE CFM DMM light session bins and delay
OAM-PM Bins and Delay (NSP) report – MDM NE CFM DMM light session bins and delay