OAM-PM Network Summary (NSP) report
Overview
The OAM-PM Network Summary (NSP) report differs from the OAM-PM Network Summary report by including OAM data for NEs managed by the NFM-P and MDM (model-driven Nokia NEs). The report shows an aggregated view of performance monitoring tests for Ethernet and IP, grouped by source and target NE.
The report includes the following session types:
-
ETH-CFM session
-
TWAMP-Light session
Use cases
QoS analysis—Identify potential service impacting issues based on thresholds for latency, jitter and packet loss between specific NEs.
Prerequisites
The following need to be performed in the NSP and NFM-P for the report to be created:
-
a DMM session must be defined with accounting enabled in both MDM-managed and NFM-P NEs
-
a TWAMP-Light session must be defined with accounting enabled in both MDM-managed and NFM-P NEs
-
You must enable aggregation using NSP. For more information, see the Telemetry information on the Network Developer Portal and the NSP Data Collection and Analysis Guide.
Report inputs
The following table shows the report inputs.
Table 18-15: OAM-PM Network Summary (NSP) report inputs
Prompt |
Notes |
Session Type |
ETH-CFM Session, TWAMP-Light Session |
End Date |
Calendar date or relative date (for example, two days ago) and time |
Granularity |
Aggregation types:
|
Report range |
Length of time to be reported, in minutes (minutes, min), hours (hours, h), days (days, d), or months (months, m) |
Source Node |
Search using partial or full names.
Select individual items or click Select All.
Both the NE name and its IP address display. |
Target Node |
Bin Type |
Bin types configured in the NSP and NFM-P |
Result set limit |
Number of results to report |
Interval Duration |
5 minutes, 15 minutes, 1 hour, or 1 day |
Logo resource ID |
The logo to add to the report. Enter the Resource ID of the logo image in the Images folder.
The default is the Nokia logo. To create the report without a logo, leave the Logo Resource ID field blank. |
Logo Position |
Choose Left, Middle, or Right. The logo appears on the left on the first page of the report if you choose Left or Middle. |
Show report output on one page |
Select the check box to enable pagination.
Note: Using the Show report output on one page option when creating reports as drill-downs may impact report rendering time. Nokia recommends disabling the Show report output on one page option when creating reports. |
Report characteristics
The following table lists the principal report characteristics.
Table 18-16: OAM-PM Network Summary (NSP) report characteristics
Characteristic |
Value |
Data type |
OAM session statistics |
Source database |
Auxiliary database |
NE types supported |
7210 SAS-M 24F, 7210 SAS-M 24F 2XFP, 7210 SAS-M 24F 2XFP ETR, 7210 SAS-T 12F 10T 4XFP, 7210 SAS-T 12F 10T 4XFP ETR, 7210 SAS-X 24F 2XFP, 7210 SAS-K, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-S/SX 1/10GE VC
7250 IXR-6, 7250 IXR-R6, 7250 IXR-s, 7250 IXR-10, 7250 IXR-e
all 7450 ESS variants
all 7750 SR variants (supports Classic and MDM modes)
all 7950 XRS variants |
Drill-down support |
Yes—Opens an OAM-PM Network Site Summary (NSP) report of the selected session type, an aggregate view of the PM sessions for the selected source and target NE. From an OAM-PM Network Site Summary (NSP) report:
|
Note: Reports exported to some file types may have missing information or be incomplete.
-
ODS: The Source Node, Target Node, and Average Delay column headings do not display.
-
ODT: The Target Node value is not completely visible in the table.
-
PPTX: The table border is not completely visible.
Examples
The following figures show report examples.