Per-site VPN Throughput report
Per-site VPN Throughput report overview
The Per-site VPN Throughput report shows the throughput for L2 and L3 VPNs on a per-site basis.
The report provides a table with a list of sites and displays the source site, destination site, VPN name, L2/L3 name, average and maximum bit rates, and maximum traffic time.
Use cases
Use the report to visualize traffic distribution between different sites in a distributed VPN.
Limitations
Report limitations include:
-
When the report is exported to the PPT file type, the table border may not be fully closed.
-
Minimum and maximum throughput aggregation cannot be compared with the minimum and maximum throughput values generated from raw granularity.
Prerequisites
The Per-site VPN Throughput report requires the Flow Collector. Perform the following:
-
Enable the collection of the IPFIX statistics as per Table 14-37, Per-site VPN Throughput report prerequisites.
-
Configure the Flow Collector; see the NSP Data Collection and Analysis Guide for information about how to configure NSP flow collection, and Flow statistics collection in the NSP Statistics Management Guide for information about how to configure NFM-P flow collection.
Table 14-37: Per-site VPN Throughput report prerequisites
Aggregator name |
Statistics class |
NE types |
---|---|---|
Analytics_cflowd_sys_vpn_r |
Analytics_cflowd_sys_vpn_r |
7250 IXR 7705 SAR 7750 SR |
Analytics_cflowd_sys_vpn_r_max_time |
Analytics_cflowd_sys_vpn_r |
7250 IXR 7705 SAR 7750 SR |
Notes:
Note: The 7705 SAR-H is not supported.
Report characteristics
The following table lists the principal report characteristics.
Table 14-38: Per-site VPN Throughput report characteristics
Example
The following figure shows a report example.