mixed mode
Mixed mode can refer to the following parameters in NFM-P:
-
Mixed Mode State on Chassis Enabled
This parameter allows the support of features on 7450 ESS or 7750 SR devices that are not available on the device when the parameter is not enabled. See the NSP NFM-P Classic Management User Guide for details.
-
The Management Operational Mode parameter is read-only in NFM-P. It shows the value of the configuration-mode parameter on the NE, if applicable:
-
classic: router configuration changes can be made via classic CLI and SNMP management interfaces
-
modelDriven: router configuration changes can be made via model-driven management interfaces (NETCONF with 'Nokia' YANG models, MD-CLI, or gRPC), but not using classic interfaces
-
mixed: router configuration changes can be made using classic and model-driven management interfaces (with some restrictions and limitations)
NSP manages devices with configuration-mode set to “modelDriven” or “mixed” as MDM devices.
NFM-P management of devices with configuration-mode set to “modelDriven” or “mixed” is not supported as of Release 24.
-