RADIUS configuration example

Description

The following NSP configuration example shows typical parameter settings for enabling RADIUS user authentication.

Note: The configuration is an example only; you must customize the parameters using the values specific to your RADIUS servers.

radius:

  enabled: true

  address: "203.0.113.34:1812"

  secret: "secret"

  protocol: "PAP"

  retries: 2

  timeout: 5000

  vendorId: "vendor_ID"

  roleVsaId: "VSA_ID"

  nasId: ""

  nasIp: ""

  nasIpv6: ""