How do I modify the system IP MPLS configuration policy?

Purpose

Use this procedure to modify the IP/MPLS Configuration policy. The IP/MPLS Configuration policy allows you to configure the maintenance mode of an IP link. You can choose one of the following maintenance modes:

  • Manual

    You must manually resignal LSPs, trigger GCO, or wait for network changes to move resources from the affected link and back onto the best path.

  • Automatic

    NSP automatically moves LSPs from the affected resources, usually using re-signalling.

Steps
 

Perform one of the following:

  1. From the Path Control, Policies view, choose System IP MPLS Configuration from the drop-down menu and click Create Policy png5.png. The Edit System IP MPLS Configuration form opens.

  2. From the Path Control, Policies view, click Edit png7.png in-line with the System IP MPLS Configuration policy. The Edit System IP MPLS Configuration form opens.


Configure the required parameters:

Parameter

Description

Description

Describes the System IP MPLS Configuration policy

Maintenance Mode

Specifies whether or not links are placed into maintenance mode automatically or manually


Click SAVE. The System IP MPLS Configuration policy is modified.

End of steps

© 2024 Nokia. Nokia Confidential Information

Use subject to agreed restrictions on disclosure and use.