How do I turn down a link set?
Steps
|
|
1 |
Perform one of the following:
-
To turn down a link set from the Path Simulation, Nework Map view, perform the following:
-
Select an IGP link on the map and click Info .
-
Click More and choose Turn Link Set Down. The link set is turned down.
-
To turn down a link set from the Path Simulation, Links view, perform the following:
-
Select an IGP link from the list.
-
Click Turn Link Down inline with the desired link. The link, and the other member of its set, is turned down.
|
2 |
Click SIMULATE. The Simulation Results form opens.
Note: The SIMULATE button is only available when a traffic-affecting network enhancement or degradation has occurred. Some actions, such as Create LSP or Re-signal, are disabled when the SIMULATE button is available.
Note: Simulation results are only available for the most recent simulated activity and will be overwritten when the SIMULATE button is next clicked.
|
3 |
Click DETAILS to view a list of LSPs affected by the configuration.
Note: This list can be revisited by clicking on the Simulation Results tab. Only the results of the most recent configuration are displayed.
|
4 |
As required, perform one of the following:
-
To return a link set to an operational state from the Path Simulation, Network Map view, perform the following:
-
On the map, select an IGP link that is operationally down and click Info .
-
Click More and choose Turn Link Set Up. The link set is turned down.
-
To return a link set to an operational state from the Path Simulation, Links view, perform the following:
-
Select an operationally down IGP link from the list.
-
Click Turn Link Up inline with the desired link. The link, and the other member of its set, is turned up.
End of steps |
© 2024 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.