How do I identify differences between a global and local key chain policy or two local key chains?

Steps
 
1 

Choose Administration→Security→TCP KeyChains from the NFM-P main menu. The TCP KeyChains form opens.

2 

Choose Local from the Policy scope menu to select a local NE. The Select a Network Element form opens.

3 

Select an NE and click OK. The NE IP address is displayed in the Local Node IP Address field.

4 

Choose the local key chain that you need to compare with another key chain and click Properties. The KeyChain (Edit) form opens.

5 

Click Local Audit On. The Local Audit form opens.

Note: You can cancel the local audit at any time by clicking Local Audit Off on the KeyChain (Edit) form.

The NFM-P does not identify differences between the Begin Time and End Time properties of key chains.

6 

Perform one of the following from the Policy scope menu:

  1. Choose Global and go to Step 7 .

  2. Choose Local to choose an NE. The Select a Network Element form opens.

    1. Select an NE and click OK. The NE IP address is displayed in the Local Node IP Address field.

    2. Go to Step 7 .

7 

Click OK. The Local Audit form closes and the appropriate global|local policy opens for comparison.

8 

View the differences between the key chains by clicking on the tabs that are highlighted with an arrow icon to indicate that differences exist on the forms. An arrow icon beside a property indicates that the property is modified. In lists, new entries are highlighted in pink and modified entries are highlighted in purple.

9 

Close the forms.

End of steps