Problem: NFM-P client GUI shuts down regularly

Causes

The NFM-P client GUI automatically shuts down under the following conditions:

• no activity on the GUI for a specified amount of time

• no communication between the GUI and the server for a specified amount of time.

• when there is an communication error that causes problems between the server and the client

Note: Changing the OS clock setting on the server station can cause communication problems on the client. If the server clock setting changes significantly, the clients must log off and the server must be restarted. Nokia recommends that the server OS clock be tied to a synchronous timing source to eliminate time shifts that may lead to polling and communication problems.

Steps

1	Disable the GUI activity check, if required. Choose Administration→Security→NFM-P User Security from the NFM-P main menu. The Security Management (Edit) form appears with the General tab selected.
2	Set the Client Timeout (minutes) parameter to 0 to disable the GUI inactivity check. Alternately, you can configure a higher value for the parameter, to increase the time that must pass before the client GUI is shut down due to inactivity.
3	Click Apply and close the form. End of steps