To specify plug-ins using the CLI
Steps
1 |
Open the LogViewer CLI. | |
2 |
Press ↵ to enter command mode. | |
3 |
Enter the following at the root prompt: plugin ↵ The following prompt is displayed:
| |
4 |
Enter the following: add ↵ LogViewer displays a list of the available plug-ins and the following prompt:
| |
5 |
Enter the name of a plug-in from the list and press ↵. | |
6 |
You may be prompted for plug-in configuration information. Supply the information, as required. Note: The currently available plug-ins and the associated configuration options are described in To specify a plug-in using the LogViewer GUI. End of steps |