To configure a RADIUS-based accounting policy

Steps
 

Choose Policies→AAA Policies→RADIUS Based Accounting from the NFM-P main menu. The RADIUS Based Accounting Policies form opens.


Click Create or choose a policy and click Properties. The RADIUS Accounting Policy (Create|Edit) form opens.


Configure the general policy and RADIUS Attributes parameters.

If you enable the NAS Port ID checkbox, you must configure the Port Prefix Type, Port Prefix String, and Port Suffix Type parameters.

If you enable the NAS Port Type checkbox, you must configure the Port Type parameter.

If you enable the NAS Port Type checkbox and you set the Port Type parameter to Config, you must configure the Port Type Value parameter.

If you enable the Calling Station ID checkbox, you must configure the Calling Station ID Type parameter.

If you enable the NAS Port checkbox, you must configure the Port Binary Specification parameter.


Configure the required parameters in the Accounting and Interval panels.

Only two accounting modes can be applied in combination. The accounting modes are host accounting, queue instance accounting, and PPPoE session accounting. A subscriber host can have up to two simultaneously active accounting modes. You can configure Host Accounting Message, Queue Instance Accounting, and Session Accounting parameters to non-default values provided that SLA Only is chosen for one parameter, and not more than two accounting modes are combined.

If you configure the Delay Start Time parameter to reduce accounting messages in a dual stack PPP session configuration, you must also configure the Optimize for Session Accounting parameter on the subscriber profile to which the RADIUS accounting policy is applied; see To configure a subscriber profile.


Select an accounting request script in the RADIUS Script Policy panel.


Select a RADIUS server policy in the RADIUS Server Policy panel.


Configure one or more RADIUS servers for accounting information forwarding:

  1. Click on the RADIUS Servers tab and configure the required parameters.

    If you set the Router Instance parameter to VPRN, you must configure a VPRN service as a virtual router instance by selecting a VPRN service in the Service Type panel.

  2. Click Create in the Servers panel.

  3. Configure the required parameters.

  4. Save your changes and close the form.


To create one or more custom queue counter configuration for a custom statistics record:

  1. Click on the Custom Record tab, then on the Queue Counter Config tab.

  2. Click Create or select a queue and click Properties. The Custom Queue Config (Create|Edit) form opens.

  3. Configure the required parameters.

    You must select one or more ingress or egress counters in order to apply them to reference counters to the significant change delta]

  4. Save your changes and close the form.


To create one or more custom override counter configurations you must select one or more ingress/egress counters in order to apply them to reference counters to the significant change delta.

  1. On the Custom Record tab, click on the Override Counter Config tab.

  2. Click Create or select an override and click Properties. The Custom Override Config (Create|Edit) form opens.

  3. Configure the required parameters.

  4. Save your changes and close the form.


10 

Configure record criteria that define the RADIUS statistics that the NFM-P collects per queue or for all queues:

  1. Click on the Significant Change Criteria tab.

  2. Configure the Significant Change Delta parameter.

  3. Select a queue ID to monitor for the significant change or enable the All Queues parameter in the Reference Queue panel.

  4. Configure the ingress and egress counters.

  5. Select an override ID or enable the All Overrides parameter in the Reference Override panel.

  6. Configure the ingress and egress counters.


11 

Save the policy and close the form. See To release and distribute a policy to distribute the policy to NEs.

End of steps