To configure a RADIUS proxy server on a VPRN site

Steps
 
1 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

2 

Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens.

3 

On the service navigation tree, expand the Sites icon, right-click on a routing instance and choose Properties. The VPRN Site (Edit) form opens.

4 

Click on the RADIUS/DHCP/Diameter tab, then on the RADIUS tab.

5 

On the RADIUS Proxy Servers tab, click Create or select a RADIUS proxy server and click Properties. The RADIUS Proxy Server (Create|Edit).

6 

Configure the parameters as required.

7 

Select a Python Policy, if required.

If you intend to configure a WLAN GW group with a distributed Python policy in Step 8, the Python policy you select in this step must be the same Python policy that is distributed to the WLAN GW group.

8 

Click Select in the WLAN GW panel to assign a ISA-WLAN GW Group, if required.

9 

Configure default RADIUS policies:

Perform the following steps:

  1. Select a RADIUS authentication policy.

  2. Select a RADIUS accounting policy.

    Note:

    If you configure a ISA-WLAN GW group in Step 8, the default RADIUS policies must be a ISA RADIUS policy.

10 

Click on the Caching tab and configure the parameters as required.

11 

Click on the Interfaces tab and click Create or select an existing network Interface and click Properties. The RADIUS Proxy Interface form opens.

Perform the following steps:

  1. Click Select and choose an interface from the Select Interface form.

  2. Select an interface and click OK. The RADIUS Proxy Server (Create|Edit) form reappears.

12 

Click on the Attribute Matching/Users tab to configure RADIUS attribute matching type and matching entries for RADIUS policies.

Perform the following steps:

  1. On the Type tab, configure the Type and Vendor ID parameters.

  2. Click on the Entry tab.

  3. Click Create to create a new RADIUS attribute matching entry, or select an existing entry in the list and click Properties. The Attribute Matching Entry form appears.

  4. Configure the Entry ID, Prefix Match String, and Suffix Match String parameters as required.

  5. Select a RADIUS authentication policy and a RADIUS accounting policy.

  6. Save your changes and close the form.

13 

Save the changes and close the forms.

End of steps