To configure a Multi-Chassis shunting profile on a base routing instance or VPRN routing instance

Steps
 
1 

Perform one of the following:

  1. Configure a Multi-Chassis shunting profile on a base routing instance.

    Perform the following steps:

    1. In the navigation tree routing view, expand Network→NE→Routing Instance.

    2. Right-click on the routing instance icon and choose Properties. The Routing Instance (Edit) form opens.

  2. Configure a Multi-Chassis shunting profile on a VPRN routing instance.

    Perform the following steps:

    1. Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

    2. Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens.

    3. On the VPRN Service tree, click on the site to which you need to configure a Multi-Chassis shunt interface.

    4. Right-click on the routing instance icon and choose Properties. The Routing Instance (Edit) form opens.

2 

Click on the IPSec tab, then on the MC Shunting Profile tab.

3 

Create or select an entry and click Properties. The Multi-Chassis Shunting Profile (Create/Edit) form opens.

4 

Configure the required parameters.

5 

Click on the MC Peer tab.

6 

Create or select an entry and click Properties. The Multi-Chassis Shunting Profile Peer (Create/Edit) form opens.

7 

Configure the required parameters.

8 

Configure the Shunt Interface parameter.

9 

Save your changes and close the forms.

End of steps