Workflow to manage shelf objects
Purpose
The following workflow describes the sequence of high-level tasks required to manage and configure shelf objects and shelf object children. This workflow assumes that the physical devices have been installed, commissioned, and discovered. See Chapter 8, Device commissioning and management for more information about device commissioning. See Chapter 9, Device discovery for more information about device discovery.
Note: Shelf objects and shelf object children can be accessed using the equipment navigation tree. See Chapter 3, NFM-P navigation tree for more information about using the equipment navigation tree.
Stages
1 |
As required, perform the following procedures to configure shelf objects.
|
2 |
Assign a card type to a chassis slot. See To assign a card type . |
3 |
As required, configure the card and card slot objects as follows:
|
4 |
As required, configure daughter card objects as follows:
|
5 |
As required, configure shelf objects that require daughter cards as follows:
|
6 |
As required, create or modify bundle objects as follows:
|