Sample deployment policy configuration

Example details and settings

The following example describes the configuration and operation of an NFM-P deployment policy. See To configure the NFM-P deployment policy for deployment policy configuration information.

The example policy settings are as follows:

  • Auto Save Scheme—Every Nth Successful Deployment

    Initiate a device configuration save after the number of configuration changes specified by Auto Save Threshold.

  • Auto Save Threshold—3

    Initiate a configuration save after every three successful deployments, if Auto Save Scheme is set to Every Nth Successful Deployment.

  • Scheduled Save Scheme—None

    Do not perform a scheduled configuration save on any NE.

  • Scheduled Save Interval—1 hour

    If scheduled saves are enabled, perform a save every hour.

  • Save Details—disabled

    Save only non-default parameter values.

  • Configuration Save Interval—30 seconds

    Delay consecutive configuration save requests for an NE that are less than 30 seconds apart.

  • Interval Repeat Limit—5

    Wait up to five Configuration Save Interval periods before performing a configuration save.

  • Retry Scheme—Retry Number Of Times

    Retry each deployment the number of times specified by Retry Interval.

  • Retry Interval—5 minutes

    Wait five minutes before retrying a failed deployment.

  • Retry Threshold—3

    Retry each failed deployment three times.