To configure two WRED slopes on a 7210 SAS

Purpose

The 7210 SAS-D and 7210 SAS-M support three WRED slopes per queue:

  • High priority/in-profile TCP

  • Low priority/out-of-profile TCP

  • Non-TCP

Perform this procedure to specify whether only the high priority and low priority slopes are used, and non-TCP slopes are ignored.

Steps
 
1 

On the equipment tree, right-click on a 7210 SAS NE and choose Properties. The Network Element (Edit) form opens.

2 

Click on the QoS tab.

3 

Configure the Use WRED Slopes parameter.

4 

Save your changes and close the form.

End of steps