Configure AA GTP filter
|
| |
|
1 |
Choose Policies→ISA Policies→Application Assurance from the NFM-P main menu. The Application Assurance Policies form opens.
|
2 |
Click Create→AA GTP Filter or select an AA GTP filter and click Properties. The AA GTP Filter (Create | Edit) form opens.
|
3 |
Configure the parameters.
|
4 |
Click on the Message Type tab.
|
5 |
Click Create, or select an entry and click Properties. The AA GTP Message Type (Create | Edit) form opens.
|
6 |
Configure the parameters.
|
7 |
Click OK to save your changes and close the form.
|
8 |
Click on the General tab.
|
9 |
Click Apply.
|
10 |
Distribute the policy to NEs, as required.
|
11 |
Close the AA GTP Filter (Create | Edit) form.
|
Configure AA SCTP filter
|
| |
|
12 |
Choose Policies→ISA Policies→Application Assurance from the NFM-P main menu. The Application Assurance Policies form opens.
|
13 |
Click Create→AA SCTP Filter or select an AA SCTP filter and click Properties. The AA SCTP Filter (Create | Edit) form opens.
|
14 |
Configure the parameters.
|
15 |
Click on the PPID tab.
|
16 |
Click Create, or select an entry and click Properties. The AA SCTP Message Type (Create | Edit) form opens.
|
17 |
Configure the parameters; click Select or type a value to specify a PPID.
|
18 |
Click OK to save your changes and close the form.
|
19 |
Click on the General tab.
|
20 |
Click Apply.
|
21 |
Distribute the policy to NEs, as required.
|
22 |
Close the AA SCTP Filter (Create | Edit) form.
|
Bind GTP and SCTP filters to AQP
|
| |
|
23 |
Choose Policies→ISA Policies→Application Assurance from the NFM-P main menu. The Application Assurance Policies form opens.
|
24 |
Choose AA Group Policy (Application Assurance) from the drop-down menu and click Select. A list of AA group policies is displayed.
|
25 |
Select a policy and click Properties. The AA Group Policy (Edit) form opens.
|
26 |
Click on the Application QoS Entries tab.
|
27 |
Select an entry and click Properties. The Application QoS Policy (Edit) form opens.
|
28 |
Click on the Action tab.
|
29 |
Use the Select buttons to specify the GTP and SCTP filters.
|
30 |
Click OK to save your changes and close the form.
|
31 |
Click Apply.
|
32 |
Distribute the policy to NEs, as required.
|
33 |
Close the AA Group Policy (Edit) form.
|
Configure GTP flow count monitoring in AA policer
|
| |
|
34 |
Choose Policies→ISA Policies→Application Assurance from the NFM-P main menu. The Application Assurance Policies form opens.
|
35 |
Choose AA Policer (Application Assurance) from the drop-down menu and click Select. A list of AA policers is displayed.
|
36 |
Select a policer and click Properties. The AA Policer (Edit) form opens.
|
37 |
Configure the GTP Flow Count Limit parameter.
|
38 |
Click Apply.
|
39 |
Distribute the policer to NEs, as required.
|
40 |
Close the AA Policer (Edit) form.
|
41 |
Close the Application Assurance Policies form.
|
Configure firewall on AA group or partition
|
| |
|
42 |
Right-click on an ISA-AA group in the Equipment view of the network navigation tree and choose Properties. The ISA-AA Group (Edit) form opens.
|
43 |
To configure the GTP firewall for the group, configure the parameters in the GTP panel.
You can configure a GTP firewall for an ISA-AA group only if the group is not partitioned.
|
44 |
To configure the GTP firewall for a partition:
-
Click on the ISA-AA partitions tab.
-
Select a partition and click Properties. The ISA-AA Group Partition (Edit) form opens.
-
Configure the parameters in the GTP panel.
-
Click OK to save your changes and close the form.
|
45 |
Click OK to save your changes and close the ISA-AA Group (Edit) form.
End of steps |