To configure an AA transit prefix policy

Steps
 
1 

Choose Policies→ISA Policies→Application Assurance from the NFM-P main menu. The Application Assurance Policies form opens.

2 

Click Create→AA Transit Prefix Policy or select an AA Transit Prefix Policy entry and click Properties. The AA Transit Prefix Policy (Create | Edit) form opens.

3 

Configure the parameters.

4 

To configure one or more transit prefix subscribers:

  1. Click on the Subscribers tab and click Create. The Transit Prefix Subscriber (Create) form opens.

  2. Configure the parameters.

  3. Choose an application profile.

  4. Save your changes and close the form.

5 

Note: Each entry ID must be assigned according to the following hierarchy, or the configuration fails:

local IPv4 < remote IPv4 < local IPv6 < remote IPv6

For example:

  • Each local IPv6 entry ID must be higher than all IPv4 entry IDs.

  • Local IPv4 entry IDs are lowest; remote IPv6 entry IDs are highest.

To create one or more transit prefix entries:

  1. Click on the Entries tab and click Create. The Transit Prefix Entry (Create) form opens.

  2. Choose a subscriber.

  3. Configure the parameters.

    The Subscriber Address and Network Address values must both be IPv4 or IPv6; you cannot configure one address as IPv4 and the other as IPv6.

  4. Save your changes and close the form.

6 

Save your changes and close the forms.

End of steps