To configure an ACL VLAN Filter policy

General Information

An ACL VLAN Filter policy can be configured on a 2-port ring MDA on the 7705 SAR-8 or 7705 SAR-18. Only the first two ports in network mode on the 2-port ring MDA can be configured with an ACL VLAN filter policy.

Steps
 
1 

Choose Policies→Filter→ACL VLAN Filter from the NFM-P main menu. The ACL VLAN Filter Policies form opens.

2 

Click Create or select an existing policy and click Properties. The ACL VLAN Filter, Global Policy (Create|Edit) form opens.

3 

Configure the parameters as required.

4 

Configure a filter entry.

  1. Click on the Filter Entries tab and click Create.The Entry, ACL VLAN Filter, Global Policy (Create) form opens.

  2. Configure the required parameters.

  3. Click on the Filter Properties tab.

  4. Configure the required parameters.

  5. Save the changes and close the form.

5 

Repeat Step 4 as required to create additional filters.

6 

Save your changes and close the forms. See To release and distribute a policy to release and distribute the policy to NEs.

7 

To associate the ACL VLAN Filter Policy with an Ethernet port on a 2-port ring MDA on a 7705 SAR-8 or 7705 SAR-18, see To configure Ethernet ports.

End of steps