To configure an SSM translate policy
Note: IGMP must be enabled on the routers to which you intend to distribute the SSM translate policy.
Steps
1 |
Choose Policies→Multicast→SSM Translate from the NFM-P main menu. The SSM Translate Policies form opens. |
2 |
Click Create or select an existing policy and click Properties. The SSM Translate Policy (Create|Edit) form opens. |
3 |
Configure the parameters as required. |
4 |
Click on the SSM Translate Items tab and click Create. The SSM Translate Policy Item (Create) form opens. |
5 |
Configure the parameters as required and save your changes. The SSM Translate Policy (Create|Edit) form reappears. Note: The SSM Translate Items added to a policy should not have overlapping IPv4 address ranges, otherwise a configuration error message will be issued. |
6 |
Click Apply to save your changes. The form refreshes to display additional tabs and buttons. |
7 |
Click Distribute to manually release and distribute the policy locally to devices. See To release and distribute a policy for additional information. Policies are also automatically distributed to devices when they are used by resources on the device. Note: When you distribute an SSM Translate policy to a router, it replaces any SSM Translate policy that may exist on that router. All existing SSM Translate Items on the router will be overwritten. |
8 |
Close the SSM Translate Policy (Create|Edit) form. The SSM Translate Policies form reappears. |
9 |
Click Search to display the newly created policy or policies in the bottom panel of the form. End of steps |