To configure QoS policy overrides on access ingress meters for the 7210 SAS

Purpose

Perform this procedure to override the meter settings of an access ingress policy for an L2 or L3 access interface on a 7210 SAS.

You cannot override the settings for QoS policies whose scope is set to exclusive.

Policy overrides on L2 access interfaces are not supported for the following:

  • Uplink SAPs

  • SAPs on mirror services

  • SAPs with time of day suites attached

Steps
 
1 

Open the properties form for the L2 or L3 access interface for which you need to configure an override:

  1. Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

  2. Choose Site (Service Management) from the object drop-down menu and click Search.

  3. Choose a 7210 SAS site from the list and click Properties. The properties form for the site opens.

  4. Expand the site equipment tree as required, and click on an L2 | L3 access interface. The properties form for the access interface opens.

2 

Click on the Override Policy Items tab, then on the Access Ingress Meters sub-tab.

3 

Click Create. The Access Ingress Meter Override (Create) form opens.

4 

Click Select in the Ingress QoS Policy Meter panel and choose a policy meter, then click OK.

5 

Click on the Override tab.

6 

Configure the required parameters.

To override any of the parameters, you must first select the associated check box. Deselect the associated Default or MAX check box to enter a specific value, or to select a drop-down menu option.

7 

Click OK. The Access Ingress Meter Override (Create) form closes.

8 

Click OK to save your changes and close the form.

End of steps