|
|
1 |
Choose Policies→Filter→LI Policies→LI IP Filter from the NFM-P main menu. The LI IP Filter Policies form opens.
|
2 |
Click Create or select a policy and click Properties. The LI IP Filter (Create|Edit) form opens.
|
3 |
Configure the required general parameters.
|
4 |
Configure one or more filter entries:
-
Click on the LI IP Filter Entries tab.
-
Click Create. The Entry, LI IP Filter (Create) form opens.
-
Configure the parameters.
-
Click on the Filter Properties tab.
-
Configure the Protocol parameter.
-
Configure the parameters in the Match Criteria panel.
The Source Port and Dest Port parameters are configurable only when the Protocol parameter is set to TCP or UDP.
-
Save the changes and close the form.
|
5 |
Associate the base IP filter with the LI IP filter:
-
Click on the IP Filter Association tab.
-
Click Create. The LI IP Filter Association (Create) form opens.
-
Select an IP filter in the IP Filter panel.
-
Save the changes and close the form.
|
6 |
Click Apply.
|
7 |
Click on the General tab.
|
8 |
Click Switch Mode to release the policy for distribution. The Release - LI IP Filter Policy form opens.
|
9 |
Choose the NEs in the Available Objects to which you want to distribute the policy and click the arrow to move the NEs to the Selected Objects panel.
|
10 |
Click Distribute and close the form.
|
11 |
Close the LI IP Filter Policies form.
End of steps |