To add an IGMP interface to a VPRN

Prerequisites

Before an IGMP interface can be configured, the following prerequisites must be met:

Steps
 
1 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

2 

Choose a VPRN and click Properties. The VPRN Service (Edit) form opens.

3 

On the service navigation tree, expand Sites→Routing Instance→Routing Instance→Routing Instance→Protocols→IGMP instance.

4 

Right-click on the IGMP instance and choose Create IGMP Interface. The IGMP Interface, Routing Instance (Create) form opens.

5 

Configure the required parameters.

6 

To assign an L3 access interface to the IGMP interface:

  1. Click Select in the Interface panel and choose a L3 access interface

  2. Configure the required parameters.

7 

Click on the Behavior tab and configure the required parameters.

8 

To configure multicast CAC, click on the Multicast CAC tab, select a multicast CAC policy and configure the required parameters.

9 

To add a static multicast group or source:

  1. Click on the Static Group/Source tab.

  2. Click Create. The Static Grp Src, Interface routing instance (Create) form opens.

  3. Configure the required parameters.

  4. Save the changes and close the form.

10 

Save the changes and close the forms.

End of steps