To add an IGMP group interface to a VPRN

Before an IGMP group interface can be configured, the following prerequisites must be met:

The VPRN routing instance must be configured for IGMP; see To configure IGMP on a VPRN routing instance .
A VPRN group interface must be configured; see To configure a group interface on a VPRN .


1	Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.
2	Choose a VPRN and click Properties. The VPRN Service (Edit) form opens.
3	On the service navigation tree, expand Sites→Routing Instance→Routing Instance→Routing Instance→Protocols→IGMP instance.
4	Configure the required parameters.
5	Right-click on the IGMP instance and choose Create IGMP Group Interface. The IGMP Group Interface, Routing Instance (Create) form opens.
6	To assign a VPRN group interface to the IGMP group interface: Click Select in the Interface panel and choose a VPRN group interface. Configure the required parameters.
7	Click on the Behavior tab and configure the required parameters.
8	To configure multicast CAC, click on the Multicast CAC tab, select a multicast CAC policy and configure the required parameters.
9	Save the changes and close the forms. End of steps