To configure ETree on a VPLS SDP binding
Purpose
Use this procedure to configure a spoke SDP as an ETree leaf. If the interface is not configured as a leaf, it will configured as a root by default.
The VC Type parameter must be set to VLAN.
Steps
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens. |
2 |
Choose a VPLS and click Properties. The VPLS Service (Edit) form opens. |
3 |
On the service tree, expand Sites→site→Spoke SDP Bindings. |
4 |
Configure the parameters in the Etree panel. |
5 |
Save the changes and close the forms. End of steps |