To configure a BRG profile

Steps
 
1 

Choose Policies→Residential Subscriber from the NFM-P main menu. The Residential Subscriber Policies form opens.

2 

Click Create→BRG Profile or select an existing BRG profile and click Properties. The BRG Profile (Create|Edit) form opens.

Modifying an active BRG Profile is potentially service-affecting. Ensure that you consider the implications of reconfiguring the profile before you proceed.

3 

Configure the required parameters.

4 

Select a RADIUS server policy and specify a RADIUS authentication password.

5 

Click on the DHCP Pool tab to configure a DHCP pool for the BRG profile.

Configure the required parameters.

6 

Click on the Custom Options tab to configure DHCP options for the BRG profile. The options are included in DHCP reply messages.

  1. Click Create or select an existing custom option entry and click Properties. The DHCP Pool Custom Option (Create|Edit) form opens.

  2. Configure the Number and Type parameters.

  3. Depending on the value of the Type parameter, configure the following:

    • IP addresses (for IP address custom option type)

    • String value (for ASCII or Hex string custom option type)

  4. Save your changes and close the form.

7 

Click on the RADIUS Proxy Servers tab to associate proxy servers with the BRG profile.

  1. Click Create or select an existing RADIUS proxy server entry and click Properties. The RADIUS Proxy (Create|Edit) form opens.

  2. Configure the Router Instance parameter.

  3. Depending on the value of the Router Instance parameter (Base or VPRN), select a VPRN service (where required) and a RADIUS proxy server.

  4. Save your changes and close the form.

8 

Click OK to save the policy and close the form, or click Apply to save the policy. See To release and distribute a policy to distribute the policy to NEs.

End of steps