Redundant system installation pathway

Description

Use this pathway through the documentation to access detailed procedures for installing a redundant NFM-P system.

An NFM-P main server can use multiple interfaces for network management. The default network-management interface address is the public IP address of the interface that is used for main server communication. If you need to configure a different or additional network-management interface, see the NSP NFM-P User Guide for information.

Note: The link in each stage leads to a section in To install a redundant NFM-P system.

Stages
 
1 

Configure firewalls between components, as required; see Check and configure firewalls.

2 

Update the NSP configuration; see Add NFM-P to NSP configuration.

3 

Download the required NFM-P installation files; see Download installation files.

4 

Install the primary database; see Install primary database.

  1. Run a script to prepare for the Oracle software installation.

  2. Install the database packages.

  3. Create the primary database.

5 

Install the standby database; see Install standby database.

  1. Run a script to prepare for the Oracle software installation.

  2. Install the database packages.

  3. Create the standby database.

6 

Install the primary main server; see Install primary main server.

  1. Install the main server packages.

  2. Create and apply the primary main server configuration.

7 

Start the primary main server; see Start primary main server.

8 

Install a single-user GUI client or client delegate server; see Install GUI client.

9 

Instantiate the standby database; see Instantiate standby database.

10 

Install the standby main server; see Install standby main server.

  1. Install the main server packages.

  2. Create and apply the standby main server configuration.

11 

Start the standby main server; see Start standby main server.

12 

Install one or more of the following optional components, as required; see Install optional components:

  • NFM-P auxiliary servers

  • NSP auxiliary database

13 

Install additional single-user GUI clients and client delegate servers, as required; see Install additional GUI clients .

14 

If any required firewalls between components are disabled, enable the firewalls, as required; see Configure and enable firewalls.